Check the fan setting
Fan ON blows air even when the burners are off. Set it to AUTO.
Change the filter
A packed filter overheats the furnace and trips a safety switch.
Listen at start-up
If the inducer motor runs but the burners never light, the igniter is a likely culprit.
Flame lights, then quits
Classic dirty flame sensor.
Water or error code
High-efficiency furnaces shut down if the condensate drain backs up.
Still cold?
Call. These are usually quick repairs.
Helpful links: New Mexico Gas Company rebates · PNM energy efficiency programs · CPSC: carbon monoxide safety









